Pdr-mounts pdm110t Manuel d'utilisateur télécharger pdf

M odel

Thank you for purchasing the PDR panel display wall mount.

To ensure the correct usage, please read and follow the instructions

manual thoroughly. Please store the instructions in a safe place

for future reference.

To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight of both the panel

display and the wall mount.

Always use at least two persons for all installations.

Fully tighten all of the mounting screws as specified in the installation instructions.

Parts Configuration Chart Features

MOUNTING ARM ASSEMBLY

Special techniques are necessary for installation of the panel display mount.

Do not attempt to perform this work by yourself.

Request an installation specialist to install this unit.

Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.

Please remember that if you remove the panel display from the wall later, you will find the screw holes and anchor bolts for the

mounting unit left on the wall. Also note that long use of the panel display may discolor the wall around it due to its heat and

airflow.

Low profile 2 5/8”

16" or 24" stud mounting points ( MODEL #110 )

Easy installation

Flat to 15 deg tilt (no tools required)

Lateral movement from center for better viewing position

Wall mount bracket…1 pc

5 mm x 16 mm

5/16" x 2 1/2” Lag bolts …4 pcs

Display bracket .... 2 pcs

6 mm x 16 mm

5/16" Flat washers…4 pcs

A rm Hook....2 pcs

P lastic Tri Knob ... 2 pcs

Plastic Washer...6 pcs

1 /4-20 x 5/8” Carriage Bolt... 2 pcs

1 /4-20 x 5/8” THPM Screw...2 pcs

1 /4” Starr Washer... 2 pcs

1 /4-20 nylock nut... 2 pcs

8 mm x 20 mm

Model # 110 = 32” Model # 120 = 24”

Square multi-mount washers...4 pcs

Model # 110 = 20” Model # 120 = 14”

See Model

Fig 1

All PDR mounts and adapters carry a limited lifetime warranty from ship date against defects in material and workmanship.

We are not liable for improper installation that results in damage to mounts, adapters or presentation equipment.

Mounts by

A division of David Engineering & Mfg. Inc.

PDM 110/120T PANEL DISPLAY MOUNT

Locking bar... 1 pc

SEE MODEL #

LEFT HAND SHOWN RIGHT HAND OPPOSITE

Assemble left and right arms per fig 1

Model #110

Model #120

5mm x 40

6mm x 40

8mm x 40

Plastic spacer 3/4 x 1”...4 pcs

4 mm x 16

4mm washer

TOP

BOTTOM

1 2 3 4

Résumé du contenu

Page 1 - Mounts by

M odel T

Page 2 - Rev 032107

the strength of the wood studs is not sufficient, add reinforcement. Always confirm the center of the stud is used for the installation. Avoid ins

Page 3 - 16 "

24"16 "16 "32"4.00EQUALSPACINGWOOD STUDS16"24"4.00EQUALSPACING 1.

Page 4 - 4. Adjust lateral movement

3. MOUNT THE DISPLAY TO THE WALL MOUNT BRACKET Fig 4Fig 54. Adjust lateral movement Lateral Movement: Fig 64Fig 7Once the insailation of the d

Modèles reliés pdm120t

Commentaires sur ces manuels

Pas de commentaire

Pdr-mounts pdm110t Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Accessoires pour la vidéo Pdr-mounts pdm110t. PDR Mounts pdm110t User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés pdm120t

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour la vidéo Pdr-mounts pdm110t